TEO Network information

From Asibot & HOAP3 & TEO Wiki
Revision as of 14:03, 26 November 2016 by Lpinel (talk | contribs) (→‎JR3 card)
Jump to navigation Jump to search

TEONET (router)

wifi-ssid: TEONET
wifi-password: teochallenge
note: wifi disabled in lab.

External IP: 163.117.150.74
Internal IP: 2.2.2.1
user: admin
pass: admin

teo-main

Memory 3.9 GiB, Processor Intel® Core™2 Duo CPU E8400 @ 3.00GHz x 2, Graphics NVIDIA GeForce 9500 GT/PCIe/SSE2 (G96 rev a1), Disk 487.9 GiB. Origin old miguelgfierro. Ubuntu 14.10 64-bit. jgvictores.

Intended for teo-main @ GitHub, automatically runs "yarp server" on port 10000. 

eth0  00:24:8c:26:ff:85  2.2.2.50
user: teo
pass: teo

The execution of "yarp server" is activated in "~/.profile" through the lines: 

yarp conf 2.2.2.50 10000
gnome-terminal -e "yarp server --write" &

manipulation (robot front right PC)

Memory 3.1 GiB, Processor Intel® Core™2 Duo CPU E7500 @ 2.93GHz x 2, Disk 106 GiB. Debian GNU/Linux 6.0.10 (squeeze). jgvictores.

Intended for teo-body @ GitHub, automatically runs "yarprun --server /manipulation". 

teo right side
wlan1  5c:d9:98:9a:94:5c  2.2.2.51
eth0  00:18:7d:0b:2d:9d  2.2.2.61
user: teo
pass: teo
su: manipulation

The execution of "yarprun --server /manipulation" is implemented as service using "daemontools" (Help on daemontools). "daemontools" is activated in "/etc/rc.local" through the line (before exit): 

/bin/csh -cf '/usr/bin/svscanboot &'

"yarprun --server /manipulation" is activated in "/etc/service/yarprun/run" through the lines: 

#!/bin/bash
export PATH=/usr/local/bin:/usr/bin:/bin
export YARP_CONF=/home/teo/.config/yarp
yarprun --server /manipulation

Additionally, in .profile, at the end, we have: 

export YARP_DATA_DIRS=$HOME/repos/teo-body/build/share/teo-body
export PATH=$PATH:$HOME/repos/teo-body/build/bin

JR3 card

Now add the following lines to /etc/rc.local (lines before the exit) to automatically run the jr3 module in the PC switching on: 

insmod /home/teo/repos/LoliRepo/jr3/jr3pci-linux-0.5/jr3pci-driver.ko
mknod /dev/jr3 c 39 0
chmod 777 /dev/jr3 #admin permission

If green LEDs are off after switching on the PC and "jr3pci_driver" does not appear after doing lsmod, try in the jr3 directory (manipulation PC: home/teo/repos/LoliRepo/jr3/jr3pci-linux-0.5/) and see README_loli. Maybe "make clean" before, sometimes work: 

sudo make
sudo insmod jr3pci-driver.ko
sudo make node

If nothing works, shutdown and revise connections!! (Revise: PCI adapter connections, power and PCI slots).

In order tu run the acquisition program, go to $manipulationPC: /home/teo/repos/LoliRepo/LoliRepo/TFM/jr3Yarp/jr3pci4channelYarp/build and execute ./jr3pci4channelYarp for all sensors data acquisition.

locomotion (robot front left PC)

Memory 3.1 GiB, Processor Intel® Core™2 Duo CPU E7500 @ 2.93GHz x 2, Disk 106 GiB. Debian GNU/Linux 6.0.10 (squeeze). jgvictores.

Intended for teo-body @ GitHub, automatically runs "yarprun --server /locomotion". 

teo left side
wlan1  5c:d9:98:9a:94:5d  2.2.2.52
eth0  00:18:7d:0b:2d:71  2.2.2.62
user: teo
pass: teo
su: locomotion

The execution of "yarprun --server /locomotion" is implemented as service using "daemontools" (Help on daemontools). "daemontools" is activated in "/etc/rc.local" through the line (before exit): 

/bin/csh -cf '/usr/bin/svscanboot &'

"yarprun --server /locomotion" is activated in "/etc/service/yarprun/run" through the lines: 

File:#!/bin/bash
export PATH=/usr/local/bin:/usr/bin:/bin
export YARP_CONF=/home/teo/.config/yarp
yarprun --server /locomotion


Additionally, in .profile, at the end, we have: 

export YARP_DATA_DIRS=$HOME/repos/teo-body/build/share/teo-body:/usr/local/share/iCub/
export PATH=$PATH:$HOME/repos/teo-body/build/bin

In order to allow yarp to read data from the sensors connected via USB port, you need to add the following rule for udev system: 

 KERNEL == "ttyUSB0", MODE = "0777"

The advise from debian udev documentation is to define rules in a file named "z21_persistent-local.rules". If there is no such file, it is recommended to create one. Taking this in consideration, the file name and path should look like this: /etc/udev/rules.d/z21_persistent-local.rules

teo-head (robot back left PC)

Memory 3.1 GiB, Processor Intel® Core™ i5-4570S CPU @ 2.90GHz x 4, Disk 52 GiB. Ubuntu 15.04 w/ 3.19.0-18-generic. jgvictores.

Intended for teo-head @ GitHub. 

eth1  00:01:2e:51:9c:c1  2.2.2.53
user: teo
pass: teo

The execution of "yarprun --server /head" is implemented as service using "daemontools" (Help on daemontools). "daemontools" is activated in "/etc/rc.local" through the line (before exit): 

/bin/csh -cf '/usr/bin/svscanboot &'

"yarprun --server /head" is activated in "/etc/service/yarprun/run" through the lines: 

#!/bin/bash
export PATH=/usr/local/bin:/usr/bin:/bin
export YARP_CONF=/home/teo/.config/yarp
yarprun --server /head

teo-benji

Memory 1.9 GiB (DDR II 800), Processor AMD Athlon(tm) 64 Processor 3200+ x 1, Graphics ATI Gallium 0.4 on ATI RV515, Disk 155.3 GiB. Origin old teo-main. Ubuntu 14.10 64-bit. loli.

teo-goku

Memory 1.8 GiB, Processor Intel® Core™ i3 CPU 540 @ 3.07GHz × 4, Graphics Intel® Ironlake Desktop, Disk 243.9 GiB. Does not recognize PCI devices. Ubuntu 14.10 64-bit. jlorente.

teo-heidi

pedro.

Mapping hostnames to IP addreses in your computer

You can edit the /etc/hosts file of your system for mapping some hostnames to IP addreses. Now, you can associate the name of teo pc's with their Ips: 

2.2.2.51 manipulation
2.2.2.52 locomotion
2.2.2.53 head

For example, if you want connect by ssh with teo-manipulation PC, you can put “ssh manipulation” instead of “ssh 2.2.2.51”. It's easier to remember!!

Setting up Wifi connection: Netgear A6100 WiFi USB Mini Adapter

First, we have to install required drivers that have not been merged with the linux kernel and do not come with most linux distros(yet).
Make sure you have the required build packages. You need to know what version of your S.O you have. 

uname-r

Then, we can install (or reinstall to be sure) the required build packages, corresponding to our version: 

sudo apt-get reinstall linux-headers-2.6.32-5-686 build-essential

Now, we will download the source code from Wikidevi 

cd src
wget http://www.edimax.com/images/Image/Driver_Utility/Wireless/NIC/EW-7822UAC/EW-7822UAC_linux_v4.2.2_7502.20130517.tar.gz

Decompress: 

tar -xvf EW-7822UAC_linux_v4.2.2_7502.20130517.tar.gz

Compile the kernel module 

cd rtl8812AU_8821AU_linux_v4.2.2_7502.20130517/
make

Install it! 

sudo make install
sudo modprobe 8812au

The wireless should now be working

Uncategorized

sudo mount -t nfs 163.117.150.231:/home/rh2 sitio_de_montaje

rsync -avzP teo-body/ teo@2.2.2.51:test/teo-body/

Retrieved from "https://apps-robots.uc3m.es/robots/w/index.php?title=TEO_Network_information&oldid=2720"